A-A-52518
3.6.2 Rubber solvent (class C). The rubber solvent shall have a boiling range of .37 to 60°C initial and 93° to 137°C end point with no oil residue.
3.6.3 Mold lubricant (class D). Mold lubricant shall be a silicone water based emulsion and shall be suitable to perform its intended function,
3.6.4 Rubber marking crayon (class E). Rubber marking crayons shall be waterproof and shall exhibit clear, sharp, even-marking qualities when marking is on the wet surface of a tire at room temperatures of 21°C.
3.7 Identification markings. Identification markings shall be placed on the outside of the container and shall be permanent and legible and shall include, as a minimum, the manufacturer’s identification code (CAGE), the contract number, the part or identification number (PIN), the marking code, and the national stock number (NSN).
3.8 Instructions. Complete instructions for the application and use of repair and retread materials described herein shall be furnished and legibly marked on wrappers, envelopes. containers or tags attached thereto.
4. Quality assurance provisions.
4.1 Responsibility for inspection. The contractor is responsible for the performance of all inspections (examinations and tests).
4.2 Contractor certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this CID and that the product conforms to the producer’s own drawings, specifications, workmanship standards, and quality assurance practices. Items with known defects shall not be submitted for Government acceptance. The Government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provision of the contract.
5. Preservation, packaging, packing, labeling and marking. Preservation, packaging, packing, labeling, and marking shall be as specified in the contract or order (see 6.3).
6. Notes.
(This section contains information of a general or explanatory nature that may be helpful, buy not mandatory.)
6.1 Low temperature cure gum (class D). Commercial contractors may use a commercially available low temperature gum in lieu of type I. classes A, B, or C
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business