ZZZ-V-25E
4.3.2.2 Clsssification of defects.
For examination purpose, defects shall be classified in
accordance with Table II.
4.3.3 Testing inspection for valves. Samples selected in accordance with 4.3.1.3 shall be subjected
to the applicable tests specified in Tables IIIA through IIID, using an AQL of 6.5 on the basis of percent
defective.
4.4. Control tests.
4.4.1 Sampling for control tests. Samples shall be selected at the rate of 12 of each 1,000 Units
produced except thet not more than 24 not less than 12 units shall be selected in any 30-day period. The
first test sample shall be taken at or near the start of production Samples shall be subjected to the
tests specified in Tables IIIA through II ID. As used herein, the term "unit" refers to a single valve
assembly or component thereof, as applicable. The term "sample" refers to the quanity of units beig
tested .
4.4.2 Failure. Failure of a control test sample to pass any specified examination or test may be
cause for the Government to refuse to accept subsequent lots until it has been proven to the satisfaction
of the Government that the faults revealed by the tests have been corrected.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business