INCH-POUND
MIL-DTL-45301E
5 June 1998
SUPERSEDING
MIL-T-45301D
22 June 1987
DETAIL SPECIFICATION
TREAD ELASTOMER: SOLID TIRE,
FOR TRACK LAYING VEHICLES
This specification is approved for use by all Departments and Agencies of
the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers 6 classes of unvulcanized tread elastomer used in the
rebuilding of roadwheels and track support rollers for track laying vehicles.
1.2 Classification. Tread elastomer will be classified as follows:
Class 1
- Piece (cut to length).
Class 2
- Roll (cut to length).
Class 3
- Sheet.
Class 4
- Unmixed sheets (two part batch).
Class 5
- Strip form (for cold feed extruder and injection molding).
Class 6
- Black master batch with separate unmixed chemicals (for mill mixing).
Group A - Physical properties - Standard tensile.
Group B - Physical properties - High tensile.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may
be of use in improving this document should be addressed to: U.S. Army Tank-automotive and
Armaments Command, ATTN: AMSTA-TR-E/BLUE, Warren, MI 48397-5000, by using the
Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this
document, or by letter.
AMSC N/A
FSC 2640
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business